Engagement Ring Repair Costs in Miami: What to Expect

Engagement rings get worn every single day, often for decades. They take more abuse than almost any other piece of jewelry. So eventually, almost every engagement ring needs some kind of repair.

Here’s what the most common repairs actually cost in Miami-Dade in 2026.

Prong retipping ($30–80 per prong)

The most common engagement ring repair. Prongs are the small claws holding your center stone in place. Over time, the tips wear down — sometimes you can feel them snag on fabric.

Cost: $30-80 per prong, depending on metal. Platinum costs more than gold.

Why it matters: Worn prongs are the leading reason center stones fall out. If you can feel the prong tip, fix it before the stone is on your bathroom floor (or worse, gone forever).

How often: Every 2-5 years for a daily-wear ring is normal. Have the prongs inspected once a year; many jewelers do it at no charge.

Stone resetting ($40–120 per stone)

If a stone has come loose or fallen out, it needs to be reset. The price depends on:

• Stone size and value (a bigger stone takes more careful handling)
• Setting type (bezel is faster than prong, but prong is more common)
• Whether the prong needs to be rebuilt first

Cost: $40-80 for small accent stones, $80-120 for center stones, more if multiple prongs need rebuilding.

Tip: Always go to a jeweler who insures the stone during work. Reputable shops have insurance for any damage during repair.

Shank repair ($60–250)

The shank is the band part of the ring. Common shank issues:

• Thin spots from wear — the bottom of the ring wears thin from contact with other fingers and surfaces
• Cracks or breaks — typically from dropping or hitting hard surfaces
• Bent or warped shanks — from compression

Cost ranges:

• Soldering a small crack: $40-80
• Adding a half-shank to reinforce a thin section: $100-180
• Full shank replacement: $150-250+

A full shank replacement is essentially rebuilding the bottom half of the ring. Sometimes it’s worth it on heirloom pieces; for newer rings, comparable cost to buying a similar plain band.

Rhodium plating ($50–100)

Specific to white gold rings. White gold has a yellow tint underneath the rhodium plating that everyone associates with “white gold.” That plating wears off over 1-3 years and the ring starts looking yellowish/dull.

Cost: $50-100 for the entire ring. Process takes a few hours.

How often: Every 1-2 years for daily-wear white gold. Some jewelers include it with an annual cleaning; ask.

Stone replacement ($variable)

If a stone is gone (lost while wearing, fell out and never found), you’ll need a replacement.

Cost: entirely depends on the stone. A 0.5ct lab-grown diamond replacement might be $200-400. A natural diamond of the same spec could be $1,500-3,000. Colored gems (sapphire, emerald, ruby) vary even more.

The labor to set a replacement is usually $40-100 on top of the stone’s cost.

Resizing for an engagement ring ($60-120)

Engagement rings get resized after weight changes, pregnancy, or aging. Most engagement rings have stones near the band, so the resize is more complex than a plain band.

Cost: $60-120 typical. More if multiple stones need to be removed for clearance during the work.

Annual maintenance ($75–150)

Many jewelers offer annual checks that include:

• Cleaning and polishing
• Prong inspection
• Tightening any loose stones
• Light rhodium touch-up (white gold)

Cost: $75-150 typically, sometimes included if you bought the ring from them.

Worth it: prevents the most expensive repairs by catching issues early.

What to ask before any repair

1. Is my stone insured during the work?
2. Is there a written quote in advance?
3. What’s the warranty on the repair? (Reputable shops give 30-90 day work guarantees)
4. Will any markings/engraving be affected?

If a shop won’t give clear answers to these, find another shop.

Related

• Ring resizing service
• Custom design service
• How much does ring resizing cost in Miami?